FC Flow Computer
104
10.5 File Tab
The File Tab has three sections. Any of the options on this tab can also be accessed from
the File submenu.
The Template Section provides for opening and saving templates. The Save and Save As
buttons provide the standard Windows functionality for dealing with files. The Open button
is used to open existing templates.
The Open option allows for creating custom templates using the existing template in
memory as the starting point. Assign a new name for this template. The template will be
saved under this new name.
A typical scenario using the setup program would be the following:
• Open up a predefined template from the supplied list
• Choose ‘Save As’ to save this to a new file name
• Proceed to customize the template by making any changes that are needed
• Save the template to disk (if you want to reuse this template)
• Download the template to an attached unit.
The Communications with FC Section allows the user to upload the setup from the unit or
download the program’s current template to the unit.
The Print (report) Section allows the user to:
1. Configure the current Windows printer through the Select Printer option.
2. Print a Maintenance Report through the PC's printer using the Print
Maintenance option.
3. Print the current setup through the PC's printer using Print Setup option.
10.6 Setup Tab
The Setup tab is where the majority of the FC instrument setup modifications are done. The
Setup tab is divided into five sections.
System Section:
Parameters, Display, Units
Input Section:
Flow, Fluid, Compensation Inputs
Output Section:
Pulse, Currents
Relay Section:
Relays
Other
Settings
Section:
Administration, Communication, Printing
NOTE: Many setup items are enabled or disabled depending on previous setup
selections, It is important to work your way through the above list in the
order shown. Be sure to verify your selections when you are through
programming to insure that no settings were changed automatically.
Summary of Contents for FC
Page 2: ......
