© National Instruments
|
2-13
Note
Only one device of a given type will be shown in this list. If more than
one device of the same type exists, use the
Device BBS Priorities
submenus to
re-order the priority of devices of the same type.
The following submenus will be displayed if one or more bootable devices of the corresponding
type is present:
•
Hard Drive BBS Priorities
—Use this setting to access the
Hard Drive BBS Priorities
submenu to re-order or disable bootable hard drive devices. Refer to the
section for more information.
•
CD/DVD ROM Drive BBS Priorities
—Use this setting to access the
CD/DVD ROM
Drive BBS Priorities
submenu to re-order or disable bootable CD/DVD ROM drive
devices. Refer to the
CD/DVD ROM Drive BBS Priorities Submenu
section for more
information.
•
Floppy Drive BBS Priorities
—Use this setting to access the
Floppy Drive BBS Priorities
submenu to re-order or disable bootable floppy drive devices. Refer to the
•
Network Device BBS Priorities
—Use this setting to access the
Network Device BBS
Priorities
submenu to re-order or disable bootable network devices. Refer to the
section for more information.
Boot Settings Configuration Submenu
Use this submenu to apply alternate configurations to boot settings. Normally, you do not need
to modify these settings, as the factory default settings provide the most compatible and optimal
configuration.
•
Setup Prompt Timeout
—This setting specifies the number of seconds the system will
wait for a BIOS Setup menu keypress (the <Delete> key). The default value is
2
.
•
Bootup NumLock State
—This setting specifies the power-on state of the keyboard
NumLock setting. The default value is
On
.
Hard Drive BBS Priorities Submenu
•
Boot Option #1, Boot Option #2, Boot Option #3
—These settings specify the boot
priority of hard drive devices. The highest priority device is displayed on the main
Boot
Option Priorities
list. Optionally, each device can also be
Disabled
if the device should
never be used as a boot device.
CD/DVD ROM Drive BBS Priorities Submenu
•
Boot Option #1, Boot Option #2, Boot Option #3
—These settings specify the boot
priority of CD/DVD ROM drive devices. The highest priority device is displayed on the
main
Boot Option Priorities
list. Optionally, each device can also be
Disabled
if the
device should never be used as a boot device.
