NI PXIe-1486 Getting Started Manual Download Page 1

GETTING STARTED GUIDE

PXIe-1486

FlexRIO FPD-Link Interface Module

This document explains how to install and configure the following variants of the PXIe-1486:

PXIe-1486 FlexRIO FPD-Link

 Deserializer

PXIe-1486 FlexRIO FPD-Link

 Serializer

PXIe-1486 FlexRIO FPD-Link

 SerDes

After completing the tasks described in this document, you will have a hardware and driver
setup that allows you to design and test your software application.

Note

 

If you purchased the PXIe-1486 as part of an NI system, refer to your system

documentation for application-specific instructions for using the PXIe-1486.

Contents

FlexRIO Documentation and Resources...................................................................................2
Preparing the System Components........................................................................................... 3

Unpacking the Kit............................................................................................................. 3
Verifying the Kit Contents................................................................................................ 3
System Components..........................................................................................................3

Prerequisites.............................................................................................................................. 4

Verifying the System Requirements..................................................................................4

Installing the Software.............................................................................................................. 4
Installing the PXIe-1486........................................................................................................... 4
Cabling the PXIe-1486..............................................................................................................4
Configuring the PXIe-1486 in MAX........................................................................................ 8
Accessing FlexRIO with Integrated I/O Examples...................................................................9

Common FlexRIO with Integrated I/O Examples.......................................................... 10

Component-Level Intellectual Property (CLIP)..................................................................... 10
Front Panels, Connectors, and Block Diagrams......................................................................11

PXIe-1486 Deserializer Front Panel, Connectors, and Block Diagram..........................11
PXIe-1486 Serializer Front Panel, Connectors, and Block Diagram..............................14
PXIe-1486 SerDes Front Panel, Connectors, and Block Diagram................................. 17
FPGA Carrier Block Diagram.........................................................................................20

Where to Go Next................................................................................................................... 20
NI Services..............................................................................................................................20

Summary of Contents for PXIe-1486























Reviews: