Preparing the System Components
Unpacking the Kit
Notice
To prevent electrostatic discharge (ESD) from damaging the device, ground
yourself using a grounding strap or by holding a grounded object, such as your
computer chassis.
1.
Touch the antistatic package to a metal part of the computer chassis.
2.
Remove the device from the package and inspect the device for loose components or any
other sign of damage.
Notice
Never touch the exposed pins of connectors.
Note
Do not install a device if it appears damaged in any way.
3.
Unpack any other items and documentation from the kit.
Store the device in the antistatic package when the device is not in use.
Verifying the Kit Contents
Verify that the following items are included in the PXIe-1486 kit.
Figure 1. Kit Contents
1
2
3
4
1. PXIe-1486 Module
2. Terminal blocks
3. PXIe-1486 Safety, Environmental, and Regulatory
Information
4. PXIe-1486 Getting Started Guide (This
Document)
System Components
The PXIe-1486 is intended for use with the following system components.
Required System Components
•
PXIe chassis with slot cooling capacity ≥58 W
•
Camera or serial device (for Deserializer or SerDes modules)
PXIe-1486 Getting Started Guide
|
© National Instruments Corporation
|
3
