Figure 4. PXIe-1486 SerDes
1
4
5
3
2
1. PXIe-1486 SerDes Module
2. Engine Control Unit (ECU)
3. FAKRA Female Code Z to FAKRA Female Code Z
Cable
4. Camera or Serial Device
5. Power Connector Wire, Positively Charged
Note
In the PXIe-1486 SerDes module configuration shown, the power connector
wire allows the ECU to power the camera or serial device.
Related Information
PXIe-1486 Deserializer Front Panel, Connectors, and Block Diagram
PXIe-1486 Serializer Front Panel, Connectors, and Block Diagram
PXIe-1486 SerDes Front Panel, Connectors, and Block Diagram
on page 17
Configuring the PXIe-1486 in MAX
Use Measurement & Automation Explorer (MAX) to configure your NI hardware. MAX
informs other programs about which NI hardware products are in the system and how they are
configured. MAX is automatically installed with FlexRIO.
1.
Launch MAX.
8
|
ni.com
|
PXIe-1486 Getting Started Guide
