3
USER’S MANUAL
Function
LED
Charge
Red always ON
Power Full
N/A
VOLUME BUTTONS
LED STATUS
Power ON
Blue
3 flashes
Power off
Blue
3 flashes
Pairing
Blue
flash150ms by 1 times
Pairing OK
Blue
flash 10sec by 1 times
Pairing fail
Blue
flash 5 sec per 1 flashes after 1min power off
Back to link
Blue
500ms per 1 flashes
link after 10sec per flashes
Low battery
Red
>3.6V 4sec per 1 flashes
3.4V power off
Calls mode
Blue
5sec by 3 flashes
Call in the mode
Blue/Red
Blue & Red Flashes 4sec per cycle
Music mode
Blue/Red
Blue & Red Flashes 4sec per cycle
Volume
up/down (tap + or – buttons
per level change)
Next
Press
for 2 seconds to go to the
next track
Back
Press
for 2 seconds to go to the
previous track
CHARGING THE HEADSET
First time charging
Before you use this Bluetooth headset, please charge the battery of
VINTAGE ARTICA NGS fully.
CHARGING THE BATTERY WITH USB CABLE
Step1: Insert USB charging cable into USB port of PC or into wall charger with
USB port.
Step2: Connect charging cable with the charging port of headset.
When the red light is on, the headset is charging.
When the red light is off, the headset is charged fully.
It takes about 3 hours to charge the headset fully.
