Hunan Next Generation Instrumental T&C Tech. Co., Ltd.
NGI
l
NGI
N36100 Series
Wide Range High Voltage Programmable DC Power Supply
29
Figure 27 System Interface One
Figure 28 System Interface Two
Table 18
Steps to set parameters under
System
:
Rotate
to select the required parameter→ Press
on the required
parameter→ Press
to move the cursor→ Rotate
to adjust the voltage →
Press
Enter
button to confirm the setting.
Parameter
Function
IP ADD.
To set IP address
Baud Rate
To set baud rate
CV/CC PRI
To set CC priority or CV priority
Beeper
To set the button sound
Language
To set the display language
Internal RES
To set internal resistance value
Auto Run
To turn on/off auto run function
Run Delay
To set delay time for auto run. When Auto
Run is turned on, N36100 will start to
output after the delay time reaches.
Brightness
To set screen brightness, range: 0-15
