Nexxt Solutions – Wireless-N 3G router
9
1.4 LED indicator description
1.4.1 Polaris 150
1.4.2 Viking 150
1.
2.
3.
4.
5.
6.
Power: Connect the supplied power adapter to this jack.
On/Off switch: Use this switch to power the unit on and off.
WAN port: This RJ45 port is where you will connect the DSL/cable modem, or
Ethernet line.
LAN ports (1-4): Connect your laptop or desktop computers in your network to any of these
RJ45 Ethernet ports.
USB: This port is used to plug a 3G/3.75G USB modem/card.
External antenna: Wirelessly broadcasts your signal throughout your home or office.
Status
Description
On
The router is working properly
Flashing
The router is receiving and transferring data
Off
The router is not working or connected properly
Name
Status
Indication
PWR
Off
Power is off.
On
Power is on.
SYS
On
The router is initializing.
Flashing
The router is working properly.
Off
The router has a system error.
WLAN/LAN 1-
4
Off
There is no device linked to the corresponding port.
On
There is a device linked to the corresponding port, but no
activity is being detected.
Flashing
There is an active device linked to the corresponding port.
3G
On
The USB 3G dongle is connected.
Flashing
Data is being received or sent through the 3G dongle.
Off
No device is linked to the USB port.
WPS/Reset
Flashing
slowly
A wireless device is connecting to the network by WPS function.
This process takes around 2
minutes to complete.
On
A
wireless device has been successfully added to the network
by WPS function. The LED will remain lit for about 5
minutes.
Flashing
quickly
A wireless device failed to be added to the network by WPS
function.
Button
Press and hold for 7-10 seconds to reset the router to its
factory default values.
