Nexxt Solutions – Wireless-N 3G router
36
User Name/Password -
Enter the User Name and Password provided by your ISP. These
fields are case-sensitive.
Dynamic IP/ Static IP –
Select the one as provided by your ISP. Then enter the ISP’s IP ad-
dress or the domain name.
If you choose static IP and enter the domain name, you should also enter the DNS assigned
by your ISP. Click
Save
to keep your changes.
Click the
Connect
button to connect immediately. Click the
Disconnect
button to disconnect
immediately.
•
•
Connect on demand -
You set up the router so as to disconnect from the Internet after a
specified period of inactivity
(Max Idle Time)
. If your Internet connection has been termi-
nated due to inactivity, Connect on demand enables the router to automatically re-establish
your connection as soon as you attempt to access the Internet once again. If you wish to
activate
Connect on Demand
, click the radio button. If you want your Internet connection to
remain active at all times, enter 0 in the
Max Idle Time
field. Otherwise, enter the number
of minutes you want to have elapsed before your Internet connection terminates.
Connect automatically -
Connect automatically after the router is disconnected. To use this
option, click the radio button.
Connect manually -
You can set up the router so as to connect or disconnect it manually.
After a specified period of inactivity
(Max Idle Time)
, the router will cancel your Internet
connection, and you will not be able to re-establish your connection automatically as soon
as you attempt to access the Internet once again. To use this option, click the radio button.
If you want your Internet connection to remain active at all times, enter “0” in the
Max Idle
Time field
. Otherwise, enter the number of minutes that you wish to keep the connected
status active, unless a new link is requested.
PPPoE -
a PPPoE-based internet connection requires a user name and password.
Dynamic IP –
an IP- based internet connection uses dynamic IP address assignment.
Static IP –
a Static-based internet connection uses static IP address assignment.
Caution:
Sometimes the connection cannot be terminated despite your setting of the ”Max
Idle Time” interval. This is due to some applications are continually linked to the internet in the
background.
4. MAC Clone
Note:
If you do not know how to choose the appropriate connection type, click the Detect
button to allow the router to automatically search your Internet connection for servers and
protocols. The connection type will be reported when an active Internet service is successfully
detected by the router. This report is for your reference only. To verify the connection type
your ISP provides, please refer to your ISP directly. The various types of Internet connections
that the router can detect are as follows:
Go to
Network MAC Clone
in the menu, in order to configure the MAC address of the
WAN on the screen as shown in figure 4-1below.
The router cannot detect PPTP/L2TP/BigPond connections with your ISP. If your ISP uses
one of these protocols, then you must configure your connection manually.
•
•
•
•
•
•
