Nexxt Solutions – Wireless-N 3G router
76
To modify or delete an existing entry, follow the steps below.
Find the desired entry in the table.
Click
Modify
or
Delete
as desired on the
Modify
column.
1.
2.
To find an existing entry, follow the steps below.
Click the
Find
button, as shown in figure 13-4.
Enter the MAC Address or IP Address.
Click the
Find
button in the page.
Click the
Enable All
button to activate all entries.
Click the
Delete All
button to erase all entries.
You can see IP addresses on the LAN and their associated MAC addresses by viewing the
ARP list. Also, you can use the Load and Delete buttons to manage the list. The user can
use this list to visualize all the existing IP & MAC binding entries (shown in figure 13-5).
1.
2.
3.
Figure 13-4 Find IP & MAC Binding Entry
Figure 13-5 ARP List
13.2 ARP List
MAC Address -
The MAC address of the monitored computer in the LAN.
IP Address -
The assigned IP address of the monitored computer in the LAN.
Status -
Indicates whether or not the MAC and IP addresses are bound.
Configure –
To load or delete an item.
Load –
To load the item into the IP & MAC Binding list.
Delete –
To erase the item.
•
•
•
•
•
•
