Nexxt Solutions – Wireless-N 3G router
83
Figure 15-5 Diagnostic Results
Figure 15-6 Firmware Upgrade
15.4 Factory Defaults
IP Address/Domain name -
Type the destination IP address (such as 202.108.22.5) or Do-
main name of the PC whose connection you wish to diagnose.
Pings count –
Specifies the number of Echo Request messages sent. The default is 4.
Ping packet size –
Specifies the number of data bytes to be sent. 64 is the default value.
Ping timeout -
Sets the maximum time that the application will wait for a reply, in millisec-
onds. When time exceeds the timeout limit, the session will expire. 800 is the default value
Traceroute Max TTL -
Sets the maximum number of hops (max TTL to be reached) in the
path to search for the target (destination). The default is 20
Click
Start
to check the connectivity of the Internet.
The
Diagnostic results
page displays the outcome of the diagnosis.
If the results you obtained are similar to the values that appear in the screen below, it means
that the connectivity to the Internet is fine.
Go to
System Tools Firmware Upgrade
in the menu, in order to update the latest firmware
version available for the router. The following screen will be displayed.
Note:
Only one user can use this tool at a time. “Number of Pings”, “Ping Size” and “Ping
Timeout” are Ping parameters. “Tracert Hops” is a Traceroute parameter.
•
•
•
•
