Bottom panel subassembly
1. Align the left support frame with the front and back corners of the
bottom panel. The section with the grille must be facing the front,
and the cable entry plate should be facing the back.
2. Secure both ends of the frame to the bottom panel using the
M8x12 hexagon screws and nuts, as illustrated below.
M8x12mm hexagon socket head screw
M8 flange nut
M6x12mm phillips screw and washer
M6 cage nut
M4x8mm self-tapping screw
White plastic washer
M5x8mm self-tapping screw
M8 L-shaped allen wrench
M6x12 screw and cage nut set:
• For 6U, 9U and 12U
• For 15U and 18U
Grounding wire
User manual
16
16
4
4
18
1
8
1
12
24
(3 sets)
1
4. Assembly procedure (recommended)
• The illustration provides an exploded view of all the
enclosure components you are about to put together.
• Open the boxes and verify that all parts, hardware
and accessories are included in the package.
• Inspect the cabinet components and identify each
individual part to ensure proper assembly of the unit.
Hardware kit
Equipment mounting hardware
1
3. Insert the M4 self-tapping screws onto the front end of the
bottom panel, as shown in image below.
FRONT
BACK
LEFT
RIGHT
Phase
Required parts
Steps
Bottom panel
Left and right support frames
M8x12 hexagon screws (8)
M8 flange nut (8)
M4x8mm self-tapping screws (2)
14
15
16
17
18
19
20
21
22
23
2
3
14
18
15
4
FRONT
BACK
Summary of Contents for NPC-F12U64B
Page 9: ......
