Notes
Grounding connection
1. Connect the first grounding cable to the door using the provided
hardware.
2. Likewise, connect the second grounding cable to the side panel
using the hardware provided.
3. Using the self-tapping screw bind both grounding cables to the
closest mounting hole on the right side horizontal beam.
4. Connect the grounding cable to the left side panel on the rear
section of the cabinet.
5. Using the self-tapping screw bind the grounding cable to the
closest mounting hole on the left side horizontal beam.
Note: fully-tighten the screws only after all the screws have been
inserted.
6. Then connect the designated grounding location directly to your
facility's earth ground with an 8 AWG wire. Do not use the enclosure
without an earth ground connection.
8
M4x8mm self-tapping screws (2)
Grounding wires (3 sets)
23
18
Summary of Contents for NPC-F12U64B
Page 9: ......
