Nexvoo OneView N110, User Manual

Page: 9 / 20

You can configure the Nexvoo OneView USB video bar on the Web management.
You can configure the following settings on the Web management.
• View device information
• Remote control configuration
• Camera Tracking
• System update & reset
• Change password
• Restore default settings
Note: Web management only supports Windows system.
1. After OneView is connected to the power supply, it will automatically turn on, and
connect OneView to your computer via USB. The computer will automatically install
OneView USB Audio, USB Camera and Remote NDIS drivers, then open the
computer device manager to view the installed USB devices. (Set Windows 10
system as example)
Network configuration
Web Management