3
Operating frequency
125kHz & 13,56MHz.
Reading technologies
Electromarine EM4200, HID® Proximity, MIFARE CSN 4 byte,
MIFARE CSN 7 byte, MIFARE Classic, MIFARE Plus, MIFARE DESFire 0.6 and
MIFARE DESFire EV1. Also supports other ISO 14443 A/B* compatible cards.
*
Not all ISO14443 B cards have been implemented in the reader, please contact
Nexus for more details on current status. MIFARE is a registered trademark of NXP
B.V. and is used under license.
Secure Access Module
(SAM):
MIFARE SAM AV2, external SIM card
connection slot.
Communication
protocols
Wiegand, Clock/Data, OSDP 1, OSDP 2 (including Secure channel),
RS232 and RS485.
Reading output format
24-1024 (excluding parity bits)
Keypad output format
Wiegand 4bit, Wiegand 8bit (Dorado), Wiegand 26bit, OSDP ASCII format.
Keypad
12 digit keypad in 4 rows of 3 keys in each row with configurable
backlight in blue color. Control features On/Off/Auto indicators.
Light itensity can be adjusted.
Indicators
LED, Green, Red and Yellow (Bi-color). Backlight in blue color. Buzzer.
Power supply
9 – 30VDC
Current consumption
24VDC idle mode with heater inactive 60 mA**
12VDC, idle mode with heater inactive 90 mA**
**Current consumption differs depending on functionality used
and can also be limited in the reader configuration.
Input/Output
4 input for LED and buzzer and 2 configurable
input/output.
Tamper alarm
Built-in mechanical tamperswitch which allows for
indication both break off protection and opening of the reader.
Operating temperature
–40° – +70°C
When installing readers in environments with extreme heat
(above + 50*C) it is recommended to utilize the climate protection
SC9901-V which provides additional shading to the reader.
Heater
Thermostat controlled embedded heater.
Operating humidity
0 – 95% RHNC
(Relative Humidity No Condensation)
Ingress Protection
Classification
IP 65
Housing dimension
L=109mm, H=25mm, W=79mm
Configuration Methods
Configuration card, reader tool software or factory configured readers.
Cidron Combi Reader -
Technical specifications
