MS-2102
4.3
Chapter 4 Front Panel Operation
Startup Messages
Startup messages are displayed when power is applied to
the controller.
This message displays the controller model.
This message displays company name of the supplier.
This messages displays the firmware version number.
This message appears when the controller has successfully completed execution of
self-diagnostic functions.
This message appears when the controller has detected faults during self-
diagnostic function execution or normal operation. This may be as result of
memory or CPU failure. The controller requires servicing.
NEXTRON
CORPORATION
MASTERTRACE HEAT
TRACING CONTROL
FIRMWARE VERSION
D2-00-00
SELF CHECK PASSED
SELF CHECK FAILED
Status Messages
Status messages are automatically displayed for any
active conditions in the controller such as trips and
alarms. These messages provide an indication of the
current state of the controller.
Some messages prompt you to press [MESSAGE
ò
] to
scroll through messages to provide additional details of
the controller status.
This message indicates there are no alarms present.
This message indicates the number of alarms on the controller. Press
[MESSAGE
ò
] to locate the problem and the cause.
This message marks the end of details to an alarm. Pressing [MESSAGE
ò
] to
scroll through details of the next alarm.
SYSTEM OK
NO ALARMS
**2 ALARMS**
PRESS MESSAGE DOWN
PRESS MESSAGE DOWN
FOR NEXT ALARM
