BioAxs 9750™ Installation & Operations Manual. Version 1.9
Copyright
2005 NextgenID, Inc. All Rights Reserved
15
specific hardware and wiring specifications as well as recommended vendors and item part
numbers.
•
Magnetic Door Sensor Switch
1
•
Magnetic Door Latch Or Door Strike (Up to 1Amp @ 12V-24V DC Load)
1,3
•
UL-Listed Class II 24V Linear Power Supply rated at 3-4 amps
1.
Battery backup capacity
should be sufficient for at least 2 Hours of continuous usage.
•
Wiring and Cable, for the items listed above
2
•
Wall Anchors - for use when installing wall mounted user access panel enclosure and
Door Controller Module wall mount brackets
1. See
Chapter 3: Hardware Specifications
for specific hardware specifications
2. See
Chapter 4: Wiring Specifications
for specific details on cabling types
3. Magnetic Door Lock Devices typically require a Request-To-Exit Device. Use of request to exit
push buttons may not be legal in your area; a single action exit mechanism may be required.
Always consult local codes and regulations when installing such devices
ESD Precautions
The BioAxs 9750™ System contains electronics sensitive to electrostatic discharge.
Take the necessary anti-static precautions when unpacking, handling and installing all
electronic components. Do not remove the BioAxs 9750™ access panel from its
container until you are ready to install it
