BioAxs 9750™ Installation & Operations Manual. Version 1.9
Copyright
2005 NextgenID, Inc. All Rights Reserved
12
Chapter 1: Preparing for Installation
Site Survey and Preparation
Locating the BioAxs 9750™ Access Panel
The BioAxs 9750™ Access Panel should be mounted on a wall or structure to comply with all
local and federal laws as they apply to the installation site.
Use the following guidelines when choosing a mounting location for the BioAxs 9750™:
•
The panel is to be located at least 6 inches from the doorjamb and at least 1’ from any
adjacent wall.
•
In order to ensure the highest level of performance for facial recognition, the BioAxs
9750™ should be mounted such that the bottom of the access panel enclosure is at a
height of 50-1/2” inches from the ground.
•
Consideration should be given to the overall distance from the BioAxs 9750™ to the
Entry point. Select a location that will allow a user to enter the secured facility within
approximately 2 seconds of being granted access by the access control system.
•
Always mount the BioAxs 9750™ opposite of the opening door swing direction to prevent
interference with individuals exiting the secured area.
Secure Area
Non-Secure
Area
B
3'
-0
"
BioAxs 9800IR
FP
IR
1'-0"
6"
Typical Mounting Areas
A
Figure 2 Typical Mounting Locations for the BioAxs 9750
