IN VEHICLE INSTALLATION
1. Insert a suitable memory card (Class 6 or higher) in to the iN-CAR CAM, taking care to follow
correct orientation markings (gold contacts facing the back of the device). Push the memory card
until it clicks into place.
Do not remove or insert the memory card when the iN-CAR CAM is powered on, this may damage
the memory card.
Note:
- Use the edge of a small coin (or similar object) to push the memory card in place if required, a
second push inwards will release the memory card.
-
2. Attach the iN-CAR CAM to the supplied mount, taking care the locking tab has ‘clicked’ firmly into
place.
3. Remove the protective plastic film from the suction pad. Select a suitable position for the mount
and clean the windscreen with a dry / clean cloth to achieve good contact between the glass and
mount, while pushing the suction cup onto the glass turn the locking wheel clockwise to secure the
mount to the windscreen.
Note:
- Choose a smooth glass area without painted effect.
Please ensure that once mounted, the iN-CAR CAM is located within the area of the vehicles
windscreen wipers to maintain a clear view during rainfall.
4. Connect the supplied car adaptor to mini-USB socket of the iN-CAR CAM and then plug the car
adaptor into the 12-24Vdc outlet of your vehicle. The device will automatically power on and start
recording once power is available.
In some vehicles this will be when connection is made, for others the device will power on once the
ignition has been turned on.
Note:
- Do NOT wire the iN-CAR CAM directly to a 12V supply or damage will result.
- Always use the supplied car adaptor cable to supply 5Vdc to the iN-CAR CAM.
The above diagram is for illustration purposes only.
09
