www.nextups.eu
49
E
n
gl
is
h
command, the default output contact is “Summary Alarm”; The signal input to
control UPS On/Off/Maintain bypass status need to be configured by LCD
setting menu or protocol command, the default input contact is “Disable”.
Note:
The relay output contact must not be connected to any utility connected
circuits. Reinforced insulation to the utility is required. The relay output contact
has a maximum rating of 30Vac/1A and 60Vdc/2A normal values.
The following figures show schematic of the dry out/in contacts.
Dry out contact schematic
Dry in contact schematic
The following table shows the options for the dry out/in contacts
