11/24 - Installation instructions for the DIVER automatic submerged safety cover - axial
11
Fig. 26
Fig. 27
-
-
Lower the partition wall into the pool.
Fig. 27
Fig. 28
-
-
Place the beams in the supports making sure that
there is a gap of less than 1 cm maximum at the end.
Fig. 28
Using masonry
Fig. 24
Position a backflow flange and a PVC pipe which
reaches your deck as per this diagram.
Fig. 24
Fig. 25
-
-
Position a cable tie in the hole of the motor flange
provided for this purpose.
-
-
Pass the cable inside and then in the masonry
routing.
Fig. 25
3.2.5 Installing the partition wall and beams
Fig. 26
-
-
Assemble the side wall panels by clicking them
together by placing them flat side by side and
hitting them with a mallet protected by a wooden
block from one end to the other.
