background image

Fit the Lap Belt Positioning Clip 
to lap belt with the Red button 
(of the buckle) facing forward.

PLACING CHILD IN THE RESTRAINT USING LAP SASH SEAT BELT & UPPER 

ANCHORAGE STRAP ENGAGED

A.

 Determine whether an upright or reclined 

installation is preferred as shown.

UPRIGHT

Recline Foot 
position 
for upright 
installation.

RECLINED

Recline Foot 
position for 
reclined 
installation.

C.

 The restraint is now ready for use as a child 

booster, ensure the upper anchorage strap is 
still engaged into the anchor fitting and tighten 
if necessary by pulling the adjustment strap (3). 
Do not overtighten causing the seat to lift.

 

ALWAYS

 roll up excess strap tightly and neatly 

store away from child’s reach using the storage 
band.

Always attach hook and remove slack.

HOW TO USE

HOW TO USE

Sash

Sash 
Guide

E.

  Seat the child on the restraint and ensure that the headrest is 

in the correct position for your child (see page 32) and adjust if 
necessary (see page 13).

F.

  Position the lap-sash belt over the child ensuring the lap portion 

is positioned into the lap recess area. Fit the Lap Belt Positioning 
Clip to the lap belt as shown below so that the lap belt is on the 
child's thighs.

G.

  Engage seat belt buckle and tongue ensuring there are no twists 

in the belt. If the seat belt buckle is adjustable, adjust the buckle 
as low as possible away from the child.

       CAUTION: ALWAYS USE THE SASH GUIDE.

D.

 Feed the sash belt through the sash guide.

Lap part of 
seat belt in 
recess area.

Remove Lap Belt 
Positioning Converter 
from recess are and 
engage into harness 
buckle.

Red 

BOOSTER 

SEAT BELT PATH

Red 

BOOSTER 

SEAT BELT PATH

35

34

Attachment Clip

Pull Adjustment Strap 
to remove slack

Storage 
Band

Car's Anchor Fitting

B.

 To move the Recline Foot from reclined to upright 

mode or vice versa pull the Foot outwards to unlock 
it, then rotate the foot.  Push to lock in place. Swing 
the seat back until it sits firmly on the vehicle seat.

 

NOTE:

 Some seat belts may be too short and may not 

fit around the child when the seat is reclined.

3

Roll up excess 
strap tightly so the 
webbing is thick 
enough to be held in 
the storage band.

A

B

C

BOOSTER SEAT WITH LAP-SASH SEATBELT

BOOSTER SEAT WITH LAP-SASH SEATBELT

Click

Summary of Contents for 10/D/2010




































Reviews: