Figure 3-5: Disengaging the side rail latches
9. Carefully slide the unit back into the rack.
10. Bolt the Nexsan BEAST Storage System to the rack front.
11. Plug the power cable into the power cable socket on the replacement PSU.
The two PSU status LEDs light up green to indicate that the unit is functioning properly and supplying
power to the unit.
12. In the graphical user interface (GUI), go to the
Home
page and verify that the status bar for the new
Power Supply Unit is green. See the
Nexsan High-Density Storage User Guide
for more information.
Power Supply Units (PSUs)
33
Part Number: P0450132, Rev. B
Nexsan BEAST™ and E-Series™
3