Number
Component
Description
7.
Four iSCSI
ports (
0
through
3
) per
RAID
Controller
1Gb/s Ethernet ports (RJ45s) for iSCSI. If a Fibre Channel or 10Gb/s
Ethernet card is installed, only ports
0
and
1
are usable.
8.
Host ports
Depending on the RAID Controller configuration, the host port connectors
are one of the following:
Two Fibre Channel ports (
0
and
1
) per HBA card;
The upper LED is orange when there is a 2Gb/s connection and green
when there is a 4Gb/s connection. The lower LED flashes yellow for
data activity, but also lights up yellow when there is an 8Gb/s
connection. When there is an 8Gb/s connection, the upper LED is off.
During the power-up sequence, both Fibre Channel port LEDs are
solid yellow. If both LEDs are flashing yellow, the Fibre Channel
connection has been lost.
Two 1Gb iSCSI (1GbE) ports (0 and 1) per HBA card; 1Gb/s Ethernet
optical SFPs or copper SFP sockets for iSCSI.
The left LED illuminates green when the power is connected, and both
LEDs flash green when there is activity.
Two 10Gb iSCSI (10GbE) ports (
0
and
1
) per HBA card: 10Gb/s
Ethernet optical SFPs or copper SFP sockets for iSCSI.
The bottom LED illuminates green when the power is connected, and
the top LED flashes green when there is activity.
LEDs
Table 1-9: LEDs
Number
Component
Description
9.
PSU status
LED
Indicates the status of power. Green indicates that the 12V and 3V3
outputs are within specification. Red indicates that one or the other, or
both, are outside of specified limits. Orange indicates that the PSU is in
standby mode. The
Environmental Information
page (under
System
Information
) in the graphical user interface (GUI) has more information.
See the
Nexsan High-Density Storage User Guide
.
10.
PSU fan LED
Indicates the status of the PSU fans. Green indicates that all fans are
operating within specifications. Red indicates that one or more fans are
either running too slowly or have failed. When the PSU is in standby
mode, this LED is off. The
Environmental Information
page (under
System Information
) in the graphical user interface (GUI) has more
information. See the
Nexsan High-Density Storage User Guide
Rear panel, BT60
13
Part Number: P0450132, Rev. B
Nexsan BEAST™ and E-Series™
1