Table 1-4: LEDs
Number
Component
Description
3.
Power LED (
PWR
)
Indicates the status of power to the components in the system.
Green indicates that all power levels are within specifications. Red
indicates that one or more power levels are outside of
specifications. The
Environmental Information
page (under
System Information
) in the graphical user interface (GUI) displays
details (see the
Nexsan High-Density Storage User Guide
).
If the
PWR
LED on the left drive drawer is amber and all other front
panel LEDs are off, this means that the Nexsan Storage System
has been powered down through the GUI. It can be powered back
up using the
SW0
switch (see
4.
Disk LED (
DSK
)
Indicates the status of the disk drives in the system. Green indic-
ates that all disk drives are operating within specifications. Red
indicates that one or more disk faults have been detected. The
Disk Drives
page (under
RAID Information
) in the graphical user
interface (GUI) displays details (see the
Nexsan High-Density Stor-
age User Guide
).
5.
Environment LED
(
ENV
)
Indicates the temperature and fan status for the system. Green
indicates that the system temperature is within specifications and
that all fans are operating properly. Red indicates that the
temperature exceeds specifications or that one or more fans are
not operating properly. The
Environmental Information
page
(under
System Information
) in the graphical user interface (GUI)
displays details (see the
Nexsan High-Density Storage User
Guide
).
6.
Status LED (
STAT
)
Indicates overall status. Green indicates that the Nexsan Storage
System is operating within specification. Red indicates a fault in
the Nexsan Storage System, which could be any of the following:
A Power Supply Unit issue with the fan, temperature, or voltage
A RAID Controller issue with the temperature, voltage, battery,
firmware, or other hardware
The
Environmental Information
page (under
System
Information
) in the graphical user interface) displays details (see
the
Nexsan High-Density Storage User Guide
).
Number
Component
Description
7.
Drawer Lock:
Secures the drive drawer in place. When this lock is disengaged, the
STAT
LED turns amber.
Rear panel, BT60
Use this section to help identify rear panel components.
Chapter 1: Overview
Nexsan BEAST BT60 and BT60X
FRU Removal and Replacement Guide
Nexsan
10
1