NexPath Telephony User Manual Download Page 143 | Manualshive

Page: 143 / 166

background image

133

Installing the NexPath TAPI 2.1 Service Provider

9.

Fill in your system name (or IP address). (If you are using a system name, it must be in the hosts file or
published in DNS for it to work. See Using your System Name rather than the IP Address on page 27
in the chapter Network Installation or the System Administration Manual for details. Then click on
Add Line, click on the text area Line Name, and type in a descriptive text name, such as Ext. 301, for
your line (delete the NewLine text unless you want this to be your line name).

Note

Take care to enter the information correctly in the NexPath configuration window. Errors (such as
invalid extensions or passwords) can cause the Windows TAPI Server to repeatedly crash, making it
very difficult to recover.

Note

The NexPath TSP can only be configured to connect to a single NexPath Telephony Server. However,
it can be configured to support multiple extensions on a given NexPath system.

10. Then click on Add Ext, and click in the text area Extension Properties, delete the 0, and type in your

extension number, such as 301.

11. Click on the Password text box, and type in a valid NexPath system password, such as the default for

mailbox 501: 1001.

12. Click on the checkbox for ACT! if you are using ACT!.

13. Carefully check your settings and click on OK at the top and then Close to close the Dialing Properties

window.

14. If any settings are incorrect, or there is a problem with the network, there may be a long delay (60 sec-

onds or more), and you will get a network or NexPath TSP error. The NexPath TSP contacts the Nex-
Path Telephony Server via the LAN, so the LAN-TCP/IP interface must be functional for the TSP to
function.

15. Installation is now complete. You are now ready to use Microsoft TAPI programs for dialing numbers.

user.bk Page 133 Wednesday, March 7, 2001 10:34 AM

«
...
141
142
143
144
145
...
»

Summary of Contents for Telephony







































































































































































Reviews:

No comments

Related manuals for Telephony

Enterprise Server S80

Brand: IBM Pages: 282

Brand: AIC Pages: 52

Brand: Atop Pages: 2

Brand: IBM Pages: 140

Brand: IBM Pages: 44

FusionServer 5288 V6

Brand: xFusion Digital Technologies Pages: 131

Brand: IEI Technology Pages: 34

Brand: Synology Pages: 24

xSeries 440 8687

Brand: IBM Pages: 80

xSeries 230 6RY

Brand: IBM Pages: 194

Brand: NEC Pages: 4

Express5800/T120e

Brand: NEC Pages: 2

Express5800/T120d

Brand: NEC Pages: 2

Express5800/T110j

Brand: NEC Pages: 32

Express5800/T110j-S

Brand: NEC Pages: 32

Express5800/T120g

Brand: NEC Pages: 40

Express5800/T110g-S

Brand: NEC Pages: 35

Express5800/T110h

Brand: NEC Pages: 40

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands