manualshive.com logo in svg

NEXIQ Technologies 121052, Installation And Setup Manual

Share
Download
NEXIQ Technologies 121052 Installation And Setup Manual Download Page 9

USB-Link™ 3 Installation and Setup Manual

Chapter 2:

Introducing the USB-Link

™

 3

Component Checklist (pg. 6)

Product Specifications (pg. 7)

System Requirements (pg. 8)

Device Features (pg. 9)

Communication Options: Wired vs Wireless (pg. 12)

Wired USB Connection (pg. 12)

Wireless Bluetooth

®

 Connection (pg. 13)

Wireless Wi-Fi Connection (pg. 14)

Mini Access Point Mode (Peer-to-Peer) (pg. 15)

Infrastructure Mode (Connecting to your Company’s Network) (pg. 16)

The USB-Link™ 3 is a hardware device that enables service bay technicians to use personal computers 
or laptops to retrieve vehicle information using wireless Bluetooth

®

 and Wi-Fi technologies, or a USB 

cable connection. Once configured, the USB-Link™ 3 interfaces with specific PC applications to perform 
vehicle diagnostics.

This chapter introduces the USB-Link™ 3 and provides details regarding the communication modes 
available to interface with your PC. It also introduces the features of the USB-Link™ 3 (i.e., LEDs, 
Pairing Button, USB port, Vehicle port).

5

Summary of Contents for 121052






















































Reviews:

No comments

Brands by name

Popular brands

Load more brands