manualshive.com logo in svg

NEXIQ Technologies 121052, Installation And Setup Manual

Share
Download
NEXIQ Technologies 121052 Installation And Setup Manual Download Page 21

USB-Link™ 3 Installation and Setup Manual

Chapter 3:

Installing the Drivers and  

Setting Up the Device

Installation Process Outline (pg. 18)

Step 1: Install the Drivers (pg. 19)

Step 2: Connect the USB-Link™ 3 to a Vehicle (pg. 27)

Making a Wired USB Connection (pg. 28)

Making a Wireless Bluetooth Connection (pg. 29)

Pair the Device (pg. 30)

Making a Wireless Wi-Fi Connection (pg. 32)

Mini Access Point Mode (pg. 32)

Infrastructure Mode (pg. 35)

Step 3: Test the Connection (pg. 36)

Using the USB-Link™ 3 Explorer Utility (pg. 40)

The Configuration Tab (pg. 42)

Switching Modes: Mini Access Point and Infrastructure (pg. 43)

The File Menu (pg. 45)

The Tools Menu (pg. 46)

Ping (pg. 46)

Options (pg. 47)

The Help Menu (pg. 49)

This chapter provides instructions for installing USB-Link™ 3 drivers and utilities, connecting the  
USB-Link™ 3 to a vehicle, connecting to a wireless network, testing the connection, and using the 
USB-Link™ 3 Explorer utility.

17

NOTE:

 Images used throughout this manual are for illustrative purposes only.

Summary of Contents for 121052






















































Reviews:

No comments

Brands by name

Popular brands

Load more brands