manualshive.com logo in svg

NEXIQ Technologies 121052, Installation And Setup Manual

Share
Download
NEXIQ Technologies 121052 Installation And Setup Manual Download Page 19

USB-Link™ 3 Installation and Setup Manual

Chapter 2: Introducing the USB-Link™ 3

Mini Access Point Mode (Peer-to-Peer)

The easiest and quickest way to connect your USB-Link™ 3 to your PC is with the Mini Access Point 
mode. In Mini Access Point mode (also known as Access Point Emulation mode), the PC communicates 
directly with the device. The USB-Link™ 3 emulates the function of an access point, allowing the PC to 
connect directly to the USB-Link™ 3. When the PC is connected to the USB-Link™ 3 in Mini Access Point 
mode, neither device is connected to the company network.

If you use your PC’s internal wireless network card to connect to both your company’s network and the 
USB-Link™ 3, you will not have access to the Internet until you have finished your session. If you prefer 
to have access to the Internet while using performing diagnostics, you will need an additional wireless 
network card dedicated for use with the USB-Link™ 3.

15

Figure 2.3

 

Mini Access Point Mode

NOTE:

 For instructions on connecting the USB-Link™ 3 and your PC using Mini Access Point Mode,  

see 

Connect Using Wi-Fi

, in Chapter 3 of this manual.

Summary of Contents for 121052






















































Reviews:

No comments

Brands by name

Popular brands

Load more brands