Nexgrill 820-0072, Owner'S Manual

Page: 14 / 64

13
OPERATING INSTRUCTIONS
PREPARING TO LIGHT YOUR GRILL
THIS COOKING APPLIANCE IS FOR OUTDOOR USE ONLY AND SHALL NOT BE USED IN A BUILDING,
GARAGE OR ANY OTHER ENCLOSED AREA.
FIND A LEVEL SURFACE ON WHICH TO PLACE THE GRILL.
STEP 1
MOVING INSTRUCTIONS
Caution: Never move the grill with burners lit or the grill is still hot.
Make sure control knob is in the “OFF” (
 ) position. Disconnect the LPG cylinder from the regulator.
Remove the regulator from the LPG tank. Be sure the grill has completely cooled for at least 30 minutes.
Close the lid. Use the legs or firebox to carry the grill.
NOTE : It is best to leave the grease tray in place attached to the bottom of the grill; some grease may
continue to drip from drain hole during transport.
REMOVE HOSE FROM THE CLIPS ON THE FRONT OF THE
GRILL.
CONNECT TO TANK.
STEP 2
STEP 3