9
FORM NO. L-20191-F-1202
PARTS REPLACEMENT - HOUSING BEARING
NOTE: The following sections are arranged by model.
Verify that you are in the correct section for your model.
Refer to Figure 9.
1.
Remove the four Socket Head Cap Screws (Item
14) and slide the Housing (Item 7), Bearing (Item
2), and the Drive Disc (Item 4) out of the FMCBE.
FMCBE 110-14
Use caution and
always wear safety
goggles when working
with spring or tension
loaded fasteners or
devices such as
retaining ring.
WARNING
2.
Remove the Retaining Ring (Item 6).
3.
Press the Drive Disc (Item 4) out of the Bearing
(Item 2) and the Housing (Item 7).
4.
Remove the Retaining Ring (Item 3).
5.
Fully supporting the Housing (Item 7), press the old
Bearing (Item 2) out of the Housing.
NOTE: Do not reuse the bearing. Applying force to the
inner bearing race to remove a bearing held by the
outer race causes damage to the bearing.
6.
Clean the bearing bore of the Housing (Item 7) with
fresh safety solvent, making sure all old Loctite
®
residue is removed.
7.
Apply an adequate amount of Loctite® 680 to
evenly coat the outer race of the new Bearing (Item
2).
8.
Carefully align the outer race of the new Bearing
(Item 2) with the bore of the Housing (Item 7).
Figure 9
Figure 9
Figure 9
Figure 9
Figure 9
7
6
3
2
4
14
9.
Supporting the Housing (Item 7) and pressing on
the outer race of the new Bearing (Item 2), press
the new Bearing into the Housing.
10. Reinstall the Retaining Ring (Item 3).
11. Support the inner race of the new Bearing (Item 2)
and press the Drive Disc (Item 4) into the new
Bearing and Housing (Item 7).
12. Reinstall the Retaining Ring (Item 6).
13. Apply a drop of Loctite
®
242 to the threads of the
Socket Head Cap Screws (Item 14).
14. Slide the Housing (Item 7), Bearing (Item 2), and
Drive Disc (Item 4) into the FMCBE and reinstall
the four Socket Head Cap Screws (Item 14).
15. Tighten the four Socket Head Cap Screws (Item
14) to 14.2 Nm [10.5 ft-lb] torque.
®
DIST. AUTORIZADO
MEX (55) 53 63 23 31
QRO (442) 1 95 72 60
MTY (81) 83 54 10 18
[email protected]
