background image

FORM NO. L-21261-B-0214

10

WARRANTY

Warranties

Nexen warrants that the Products will be free from any defects in material or workmanship for a period of 12 months 
from the date of shipment. NEXEN MAKES NO OTHER WARRANTY, EXPRESS OR IMPLIED, AND ALL IMPLIED 
WARRANTIES, INCLUDING WITHOUT LIMITATION, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS 
FOR A PARTICULAR PURPOSE ARE HEREBY DISCLAIMED. This warranty applies only if (a) the
Product has been installed, used and maintained in accordance with any applicable Nexen installation or maintenance 
manual for the Product; (b) the alleged defect is not attributable to normal wear and tear; (c) the Product has not been 
altered, misused or used for purposes other than those for which it was intended; and (d) Buyer has given written notice 
of the alleged defect to Nexen, and delivered the allegedly defective Product to Nexen, within one year of the date of 
shipment.

Exclusive Remedy

The exclusive remedy of the Buyer for any breach of the warranties set out above will be, at the sole discretion of Nexen, 
a repair or replacement with new, serviceably used or reconditioned Product, or issuance of credit in the amount of the 
purchase price paid to Nexen by the Buyer for the Products.

Limitation of Nexen’s Liability

TO THE EXTENT PERMITTED BY LAW NEXEN SHALL HAVE NO LIABILITY TO BUYER OR ANY OTHER PERSON 
FOR INCIDENTAL DAMAGES, SPECIAL DAMAGES, CONSEQUENTIAL DAMAGES OR OTHER DAMAGES OF 
ANY KIND OR NATURE WHATSOEVER, WHETHER ARISING OUT OF BREACH OF WARRANTY OR OTHER 
BREACH OF CONTRACT, NEGLIGENCE OR OTHER TORT, OR OTHERWISE, EVEN IF NEXEN SHALL HAVE 
BEEN ADVISED OF THE POSSIBILITY OR LIKELIHOOD OF SUCH POTENTIAL LOSS OR DAMAGE. For all of 
the purposes hereof, the term “consequential damages” shall include lost profits, penalties, delay images, liquidated 
damages or other damages and liabilities which Buyer shall be obligated to pay or which Buyer may incur based upon, 
related to or arising out of its contracts with its customers or other third parties. In no event shall Nexen be liable for any 
amount of damages in excess of amounts paid by Buyer for Products or services as to which a breach of contract has 
been determined to exist. The parties expressly agree that the price for the Products and the services was determined 
in consideration of the limitation on damages set forth herein and such limitation has been specifically bargained for and 
constitutes an agreed allocation of risk which shall survive the determination of any court of competent jurisdiction that 
any remedy herein fails of its essential purpose.

Limitation of Damages

In no event shall Nexen be liable for any consequential, indirect, incidental, or special damages of any nature whatsoever, 
including without limitation, lost profits arising from the sale or use of the Products.

Warranty Claim Procedures

To make a claim under this warranty, the claimant must give written notice of the alleged defect to whom the Product was 
purchased from and deliver the Product to same within one year of the date on which the alleged defect first became 
apparent.

Nexen Group, Inc.

560 Oak Grove Parkway

Vadnais Heights, MN  55127

800.843.7445

Fax: 651.286.1099

www.nexengroup.com

ISO 9001 Certified

Summary of Contents for 964518











Reviews: