D731D_Origin_Lora_Technical_Guide_EN.docxD731D_Origin_Lora_Technical_Guide
_EN.docx
D731D_Origin_Lora_Technical_Guide_EN.
docx
D731D_Origin_Lora_Technical_Guide_EN.docx
2.3.
Air quality analysis
Origin embeds a temperature/humidity sensor that enables air quality analysis. Depending on
the uses-cases, you can select the appropriate function to get temperature / humidity and air quality
data. These functions can be activated, deactivated and configured via downlink (Refer to section
4.10 Reconfiguration via downlink message).
Daily air quality
This function measures temperature, humidity and air quality every 10 minutes.
Every 24h, it provides:
o
Minimal, maximal and average temperature and humidity over last 24h
o
IZIair air quality information
Temperature/Humidity datalog
This function enables to gather several temperature/humidity measurements into a single LoRa
message. The period between the measurements can be configured between 10 minutes and 150
minutes.
Every 6 hours, it provides the last temperature/humidity data (between 2 and 36 data depending
on the configuration) (Refer to section 4.7 Datalog Temperature and 4.8 Datalog Humidity).
Example 1
–
Period between measurements
configured to 60 minutes
Example 2
–
Period between measurements
configured to 30 minutes
