NEXPEED NBG440 User’s Manual
NexComm Systems, Inc. 24 PAGE
s1 gshdsl(ANNEX-A) RT 4wire
mx0 bind = { }
(conf)#
Using
gshdslset
Commands
If you type the following command, it displays
gshdslset help
commands.
COMMAND
(conf)# gshdslset help
Usage Examples:
(conf)# gs help
Usage:gshdslset margin <0 ~ 15> <ifname>
gshdslset backoff enable|disable <ifname>
gshdslset bert <seconds> <ifname>
gshdslset bert show
(conf)#
Monitoring the SHDSL port
Use the
gshdslset
command to display the status of a G.SHDSL physical port on the
router.
COMMAND
(conf)# gshdslset
Usage Examples:
(conf)# gs
G.SHDSL R2.0(A.233.1.21) Device Driver, (16:53 02/27/2004)
☞
chipset information
-------------------------------------------------------
Line # 0 1
☞
Index of SHDSL port
-------------------------------------------------------
Side
RT
RT
☞
Equipment Type
Mode
ADAPTIVE ADAPTIVE
☞
Rate Mode
OP state
[Data] [Data]
☞
Operating Status
SYNC status sync sync
☞
SYNC Status (none/ sync)
rate(kbps) 2320 2320
☞
Actual bit rate
Tx Power 7
7
☞
Transmit Power
LoopAtten(dB) 0
-1
☞
Loop Attenuation
SNR(dB) 37
38
☞
Received signal-to-noise ratio(SNR)
SMargin (dB) 6 6
☞
startup margin value
(conf)#
