N560 series H/W Installation Guide
NexComm Systems, Inc. 10 PAGE
2.3.2
100BASE-FX Status LEDs
For each 100BASE-FX, N56xF has LEDs showing the status of the Port.
Table 2-3 describes the LED’s function.
LED
LINK STATUS / ACTIVITY
GREEN
ON
Fiber Optic port connected to the media
OFF
Fiber Optic port disconnected to the media
BLINK RX data is being received
YELLOW
ON -
OFF
No TX data being transmitted
BLINK TX data is being transmitted
< Table 2-3 > Indication of 100BASE-FX LEDs
2.4
LAN Port Part (10/100BASE-T)
N560 series connects to a network device, such as Ethernet switch, through its 10/100 Mbps Ethernet
ports. These ports of N560 series provide RJ-45 female connectors, so a user can use UTP cable with two
RJ-45 jacks for the connection.
In addition, each Ethernet port has 2 LEDs so that a user can be aware of the Ethernet ports connectivity.
One is for link status and RX status, the other for TX status.
Table 2-4 summarizes this.
LED State
Description
GREEN
OFF
LAN port disconnected to the media
ON
LAN port connected to the media
Blinking
LAN port connected to the media and RX data is being received
YELLOW
OFF
No TX data being transmitted
Blinking
TX Data is being transmitted
< Table 2-4 > Indication of LAN Port Status LEDs
The LAN port supports 10/100Mbps speed on the UTP cable at a distance of up to 100 meters or less.
Figure 2-4 lists the pin-outs for the LAN port connector (labeled "10/100BASE-T”).
