PEAK 637 User‘s Guide
BIOS Setup 3-
3
Load BIOS defaults
BIOS defaults indicates the most appropriate value of the system parameter which the system would be in
minimum performance. The OEM manufacturer may change the defaults through MODBIN before the binary
image burn into the ROM.
Load setup defaults
Chipset defaults indicates the values required by the system for the maximum performance. The OEM
manufacturer may change to defaults through MODBIN before the binary image burn into the ROM.
Integrated Peripherals
This category allows you to set up all the on board I/O controllers like IDE, SCSI, FDC, etc,.
Supervisor/User Password
Change, set, or disable password of supervisor or user. It allows you to limit access to the system and Setup,
or just to Setup.
IDE HDD auto detection
Automatically configure hard disk parameters.
Save & exit setup
Save CMOS value changes to CMOS and exit setup.
Exit without save
Abandon all CMOS value changes and exit setup.
