Nexcom PEAK 6320A, User Manual

Page: 39 / 91

PEAK 6320A User’s Guide
BIOS Setup 4-
8
Time
The time format is <hour> <minute> <second>. which accepts both function key or
numerical key The time is calculated based on the 24-hour military-time clock. For
example, 1 p.m. is 13:00:00.
Primary Master/Primary Slave
The categories identify the types of drives that have been installed in the
computer. There are 45 predefined types and 2 user definable types are for
Enhanced IDE BIOS. Type 1 to Type 45 are predefined. Type User is
user-definable.
Press PgUp/<+> or PgDn/<
−
> to select a numbered hard disk type or type the
number and press <Enter>. Note that the specifications of your drive must match
with the drive table. The hard disk will not work properly if you enter improper
information for this category. If your hard disk drive type is not matched or listed,
you can use Type User to define your own drive type manually.
If you select Type User, related information is asked to be entered to the following
items. Enter the information directly from the keyboard and press <Enter>. This
information should be provided in the documentation from your hard disk vendor
or the system manufacturer.
If the controller of HDD interface is ESDI, the selection shall be “Type 1”.
If the controller of HDD interface is SCSI, the selection shall be “None”.
If the controller of HDD interface is CD-ROM, the selection shall be “None”.
CYLS. number of cylinders
HEADS number of heads
PRECOMP write precom
LANDZON
E
landing zone
SECTORS number of sectors
MODE HDD access mode
If a hard disk has not been installed select NONE and press <Enter>.