Copyright © 2011 NEXCOM International Co., Ltd. All Rights Reserved.
37
Chapter 3: System Setup
NISE 2100, NISE 2100A, NISE 2110, NISE 2110A User Manual
Installing a SODIMM
1. Locate the SODIMM socket on the board.
SODIMM
socket
2. Insert the module into the socket at an approximately 30 degrees
angle. Apply firm even pressure to each end of the module until it slips
into the socket. The gold-plated connector on the edge of the module
will almost completely disappear inside the socket.
SODIMM
