Nexcom Neu-X101 User Manual Download Page 53

Page: 53 / 58

Neu-X101 User Manual

Chapter 4: BIOS Setup

Network Stack Configuration

This section is used to configure the network stack settings.

Advanced

→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit

Enable/Disable UEFI Network
Stack

Network Stack

Ipv4 PXE Support

Ipv4 HTTP Support

Ipv6 PXE Support

Ipv6 HTTP Support

PXE boot wait time

Media detect count

[Enabled]

[Disabled]

Network Stack

Enables or disables UEFI network stack.

Ipv4 PXE Support

Enables or disables IPv4 PXE support. If disabled, the IPv4 boot option will
not be created.

Ipv4 HTTP Support

Enables or disables Ipv4 HTTP support.

Ipv6 PXE Support

Enables or disables IPv6 PXE support. If disabled, the IPv6 boot option will
not be created.

Ipv6 HTTP Support

Enables or disables Ipv6 HTTP support.

PXE boot wait time

Configures the wait time to press the ESC key to abort the PXE boot.

Media detect count

Configures the number of times the media will be checked.

Summary of Contents for Neu-X101


























































Search results

Summary of Contents for Neu-X101

Reviews:

Related manuals for Neu-X101

Brands by name

Popular brands

Nexcom Neu-X101, User Manual

Search results

Summary of Contents for Neu-X101

Reviews:

Related manuals for Neu-X101

Brands by name

Popular brands