Nexcom MAXI 6560 User Manual Download Page 63

Page: 63 / 76

MAXI 6560 Series User‘s Guide

BIOS Setup 4-

The board installed is not responding to the ID request, or no board ID has been
found in the indicated slot.

NOTE: When this error appears, the system will boot in ISA mode, which allows
you to run the EISA Configuration Utility.

Slot Not Empty

Indicates that a slot designated as empty by the EISA Configuration Utility actually
contains a board.

NOTE: When this error appears, the system will boot in ISA mode, which allows
you to run the EISA Configuration Utility.

SYSTEM HALTED, (CTRL-ALT-DEL) TO REBOOT ...

Indicates the present boot attempt has been aborted and the system must be
rebooted. Press and hold down the CTRL and ALT keys and press DEL.

Wrong Board In Slot
PLEASE RUN EISA CONFIGURATION UTILITY

The board ID does not match the ID stored in the EISA non-volatile memory.

NOTE: When this error appears, the system will boot in ISA mode, which

allows

you to run the EISA configuration utility.

BIOS Reference - POST Codes

Note:

EISA POST codes are typically output to port address 300h.

ISA POST codes are output to port address 80h.

POST

(hex)

Description

Summary of Contents for MAXI 6560













































































Search results

Summary of Contents for MAXI 6560

Reviews:

Related manuals for MAXI 6560

Brands by name

Popular brands

Nexcom MAXI 6560, User Manual

Search results

Summary of Contents for MAXI 6560

Reviews:

Related manuals for MAXI 6560

Brands by name

Popular brands