Copyright © 2019 NEXCOM International Co., Ltd. All Rights Reserved.
25
ICES 675 User Manual
Chapter 3: BIOS Setup
Serial Port Console Redirection
This section is used to configure the serial port that will be used for console
redirection.
Console Redirection
Enables or disables console redirection.
Advanced
Version 2.20.1271. Copyright (C) 2019 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2019 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Console Redirection Enable or
Disable.
COM0
Console Redirection
Console Redirection Settings
COM1
Console Redirection
Console Redirection Settings
COM2(Pci Bus0,Dev0,Func0) (Disabled)
Console Redirection
Legacy Console Redirection
Legacy Console Redirection Settings
Serial Port for Out-of-Band Management /
Windows Emergency Management Services (EMS)
Console Redirection
Console Redirection Settings
[Disabled]
[Disabled]
Port Is Disabled
[Disabled]
►
►
►
►
Advanced
Version 2.20.1271. Copyright (C) 2019 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2019 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Enables Legacy USB support.
AUTO option disables legacy
support if no USB devices are
connected. DISABLE option will
keep USB devices available
only for EFI applications.
USB Configuration
USB Module Version
USB Controllers:
1 XHCI
USB Devices:
1 Keyboard
Legacy USB Support
XHCI Hand-off
USB Mass Storage Driver Support
USB hardware delays and time-outs:
USB transfer time-out
Device reset time-out
Device power-up delay
21
[Enabled]
[Disabled]
[Enabled]
[20 sec]
[20 sec]
[Auto]
Legacy USB Support
Enable Enables Legacy USB.
Auto
Disables support for Legacy when no USB devices are connected.
Disable Keeps USB devices available only for EFI applications.
XHCI Hand-off
This is a workaround for OSs that does not support XHCI hand-off. The
XHCI ownership change should be claimed by the XHCI driver respectively.
USB Mass Storage Driver Support
Enables or disables USB mass storage driver support.
USB Configuration
This section is used to configure the USB.
