Copyright © 2021 NexAIoT International Co., Ltd. All Rights Reserved.
39
CE-CL User Manual
Chapter 3: BIOS Setup
Fan Speed
Detects and displays fan speed.
CPU Temperature
Detects and displays the current CPU temperature.
System Temperature
Detects and displays the current system temperature.
+12V
Detects and displays 12V voltage.
+5V
Detects and displays 5V voltage.
+3.3V
Detects and displays 3.3V voltage.
Vcore
Detects and displays the Vcore CPU voltage.
Advanced
Version 2.20.1275. Copyright (C) 2021 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2021 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
This is a workaround for OSes
without XHCI hand-off support.
The XHCI ownership change
should be claimed by XHCI
driver.
USB Configuration
USB Module Version
USB Controllers:
1 XHCI
USB Devices:
2 Drives, 1 Keyboard, 1 Hub
XHCI Hand-off
USB Mass Storage Driver Support
USB hardware delays and time-outs:
USB transfer time-out
Device reset time-out
Device power-up delay
Mass Storage Devices:
Nexcom 8.00
Generic Flash Disk 8.01
23
[Enabled]
[Enabled]
[20 sec]
[20 sec]
[Auto]
[Auto]
[Auto]
XHCI Hand-off
This is a workaround for OSs that does not support XHCI hand-off. The
XHCI ownership change should be claimed by the XHCI driver.
USB Mass Storage Driver Support
Enables or disables USB mass storage device driver support.
USB transfer time-out
The time-out value for control, bulk, and Interrupt transfers.
USB Configuration
This section is used to configure the USB.
