Copyright © 2021 NexAIoT International Co., Ltd. All Rights Reserved.
45
CE-CL User Manual
Chapter 3: BIOS Setup
SATA and RST Configuration
SATA Controller(s)
Enables or disables the SATA controller.
SATA Mode Selection
Configures the SATA as AHCI mode.
AHCI This option configures the Serial ATA drives to use AHCI
(Advanced Host Controller Interface). AHCI allows the storage
driver to enable the advanced Serial ATA features which will
increase storage performance
Chipset
Version 2.20.1275. Copyright (C) 2021 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2021 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
SATA and RST Configuration
SATA Controller(s)
SATA Mode Selection
Serial ATA Port 0
Serial ATA Port 1
Serial ATA Port 2
[Enabled]
[AHCI]
Empty
Empty
TS128GMTS800I (128.0GB)
Enable/Disable SATA Device.
Security
Save & Exit
Advanced
Chipset
Boot
Security
Main
Version 2.20.1275. Copyright (C) 2021 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2021 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Set Administrator Password
Password Description
If ONLY the Administrator’s password is set,
then this only limits access to Setup and is
only asked for when entering Setup.
If ONLY the User’s password is set, then this
is a power on password and must be entered to
boot or enter Setup. In Setup the User Will
have Administrator rights.
The password length must be
in the following range:
Minimum length
3
Maximum length
20
Administrator Password
User Password
Administrator Password
Select this to reconfigure the administrator’s password.
User Password
Select this to reconfigure the user’s password.
