Copyright © 2021 NexAIoT International Co., Ltd. All Rights Reserved.
38
CE-CL User Manual
Chapter 3: BIOS Setup
Serial Port 2 Configuration
This section is used to configure serial port 2.
Serial Port
Enables or disables the serial port.
Change Settings
Selects an optimal setting for the Super IO device.
Onboard Serial Port Mode
Configures the serial port mode to RS232, RS422 or RS485.
Advanced
Version 2.20.1275. Copyright (C) 2021 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2021 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Enable or Disable Serial Port
(COM)
Serial Port 2 Configuration
Serial Port
Device Settings
Change Settings
Onboard Serial Port Mode
[Enabled]
IO=2F8h; IRQ=3;
[Auto]
[RS232]
Smart Fan Mode
Selects the mode of the fan, the options are Full on Mode and Automatic
Mode.
Set Temp.-active S.F.
Configures the temperature threshold to activate smart fan.
Set Temp.-active Full Run
Configures the temperature threshold to activate the fan in full speed.
Hardware Monitor
This section is used to monitor hardware status such as temperature, fan
speed and voltages.
Advanced
Version 2.20.1275. Copyright (C) 2021 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2021 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Smart Fan Mode Select
Hardware Monitor
Smart Fan Mode
Set Temp. -active S.F.
Set Temp. -active full run
FAN Speed
CPU Temperature
System Temperature
+12V
+5V
+3.3V
VCORE
[Automatic Mode]
[35 C/ 95 F]
[75 C/167 F]
: N/A
: +37 C
: +38 C
: +11.94 V
: +5.09 V
: +3.31 V
: +0.80 V
