Newport NPC1USB, User Manual, Page: 31 / 48

NPC1USB Voltage Piezo USB Amplifier
SE — Do Nothing, No Error for Compatibility
Usage Not Ref. Config. Disable Ready Motion
– – –

–
Syntax xxSEnn , or xxSE? or SE
Parameters
Description xx [int] — Controller address.
nn [float] — Unused.
Range xx — 1.
nn — Unused.
Units xx — None.
nn — None.
Defaults xx Missing: Error B.
Out of range: Error B.
Floating point: Error A.
nn
Missing: Error C.
Out of range: Error C.
Description The SE command is implemented for compatibility only.
Returns None.
Errors A — Unknown message code or floating point controller address.
B — Controller address not correct.
C — Parameter missing or out of range.
D — Execution not allowed.
H — Execution not allowed in NOT REFERENCED state.
I — Command not allowed in CONFIGURATION state.
J — Execution not allowed in DISABLE state.
L — Execution not allowed in HOMING state.
M — Execution not allowed in MOVING state.
Rel. Commands None.
Example 1SE3 | Do nothing.
25 EDH0403En1010 — 07/17