Newport LDC-3706 Series, User Manual

Page: 87 / 124

December 2019 75 LDC-3706 Series Laser Controller
ENABle:CONDition <nrf>
LAS TEC
ENABle:CONDition?
Description
Sets or reports the selected instrument’s Condition Enable status register. See chapter 3, Status Reporting.
See CONDition? Command for bit table.
Parameter A number containing the bit-encoded value to set in the register.
Example ENAB:COND 16
Only bit 4 is set; when an interlock error occurs the Laser Condition Summary bit will be set in the Status Byte.
EVEnt?
LAS TEC
Description R
eports the selected instrument’s Event status register. See chapter 3, Status Reporting. This query will report
the event status register, then clear the register.
Example EVE?
A response of 8 (bit 3 set) indicates that a Over High T or R Limit condition occurred since the last read of the
Event register.