Newport 350B, User Manual, Page: 14 / 66

General Information 13 13
1.1.7 Protective Conductor Terminal
Figure 7 Protective Conductor Terminal
The protective conductor terminal symbol in the above figure identifies the location
of the bonding terminal, which is bonded to conductive accessible parts of the
enclosure for safety purposes. The intent is to connect it to an external protective
earthing system through the power cord.
1.2 Warnings and Cautions
The following are definitions of the Warnings, Cautions and Notes that are used
throughout this manual to call attention to important information regarding user safety,
the safety and preservation of equipment or an important tip.
WARNING
Situation has the potential to cause bodily harm or death.
CAUTION
Situation has the potential to cause damage to property or equipment.
NOTE
Additional information the user or operator should consider.
1.2.1 General Warnings
Observe these general warnings when operating or servicing this equipment:

Heed all warnings on the unit and in the operating instructions.

Do not use this equipment in or near water.

This equipment is grounded through the grounding conductor of the power cord.

Route power cords and other cables so they are not likely to be damaged.

Disconnect power before cleaning the equipment. Do not use liquid or aerosol
cleaners; use only a damp lint-free cloth.

Lockout all electrical power sources before servicing the equipment.

To avoid fire hazard, use only the specified fuse(s) with the correct type number,
voltage and current ratings as referenced in the appropriate locations in the
service instructions or on the equipment. Only qualified service personnel should
replace fuses.