Start Up Guide
3
1.4
Unpacking and Handling
It is recommended that the Models 1936-R/2936-R Series Optical Power
Meters be unpacked in a lab environment or work site. Unpack the system
carefully; small parts and cables are included with the instrument. Inspect the
box carefully for loose parts before disposing of the packaging. You are
urged to save the packaging material in case you need to ship your equipment
in the future.
1.5
Inspection for Damage
The Models 1936-R/2936-R Series Optical Power Meters are carefully
packaged at the factory to minimize the possibility of damage during
shipping. Inspect the box for external signs of damage or mishandling.
Inspect the contents for damage. If there is visible damage to the instrument
upon receipt, inform the shipping company and Newport Corporation
immediately.
WARNING
Do not attempt to operate this equipment if there is evidence of
shipping damage or you suspect the unit is damaged. Damaged
equipment may present additional hazards to you. Contact
Newport technical support for advice before attempting to plug
in and operate damaged equipment.
1.6
Parts List
The following is a list of parts included with the 1936-R/2936-R Series
Optical Power Meters:
1.
User’s Manual (softcopy in CD)
2.
Start-up Guide (Hardcopy)
3.
Software Drivers and Utilities (CD)
4.
Power cord
5.
Two fuses
If you are missing any hardware or have questions about the hardware you
have received, please contact Newport Corporation.
1.7
Choosing and Preparing a Suitable Work Surface
The Models 1936-R/2936-R Series Optical Power Meters may be placed on
any reasonably firm table or bench during operation. The front legs of the
unit can be pulled out to tilt the unit at an angle, if desired.
