Newport 1815-C, Operator'S Manual

Page: 8 / 34

vii
Safety Symbols and Terms
The following safety terms are used in this manual:
The Warning heading in this manual explains dangers that could result in
personal injury or death.
The Caution heading in this manual explains hazards that could damage
the instrument.
In addition, a Notes heading gives information to the user that may be
beneficial in the use of this instrument.
General Warnings and Cautions
The following general warnings and cautions are applicable to this instrument:
Warning
The American National Safety Institute (ANSI) states that a shock
hazard exists when probes or sensors are exposed to voltage levels
greater then 42VDC or 42V peak AC. Do not exceed 42V RMS between
any portion of the Model 1815-C (or any attached detector or probe)
and earth ground or a shock hazard will result.
Caution
There are no user serviceable parts inside the Model 1815-C. Work
performed by persons not authorized by Newport may void the
warranty. For instructions on obtaining warranty repair or service
please refer to Section 5 of this manual.
Note
The Model 1815-C is a battery powered device with no internal
voltages exceeding 9V.