3
Newmar • 1580 Sunflower Ave, Suite 100, Costa Mesa, CA 92626
Phone: 714-751-0488 • E-mail: [email protected]
3.
R
ECEIVING
I
NSTRUCTIONS
Newmar provides all equipment to the delivering carrier securely packed and in perfect condition. Upon
acceptance of the package from Newmar, the delivering carrier assumes responsibility for its safe arrival.
Once the equipment is received, it is the recipient’s responsibility to document any damage the carrier
may have inflicted, and to file the claim promptly and accurately.
N
OTE
: the period to make a claim against damage by a transport carrier can be short, a matter of days, and
varies by transport method, the transport contract, and local laws.
3.1.
Package Inspection
Examine the shipping crate or carton for any visible damage: punctures, dents, and any other signs of
possible internal damage.
Describe any damage or shortage on the receiving documents and have the carrier sign their full name.
3.2.
Equipment Inspection
Open the crate or carton and inspect the contents for damages. While unpacking, be careful not to discard
any equipment, parts, or manuals. If any damage is detected, call the delivering carrier to determine the
appropriate action. They may require an inspection.
NOTE: Save all the shipping materials for the inspector to see.
After the inspection has been made, if damage has been found, contact Newmar. We will determine if the
equipment should be returned to our plant for repair or if some other method would be more expeditious.
If it is determined that the equipment should be returned to us, ask the delivering carrier to send the
packages back at the delivering carrier’s expense.
If repair is necessary, we will invoice you for the repair so that you may submit the bill to the delivering
carrier with your claim forms.
It is your responsibility to file a claim with the delivering carrier. Failure to properly file a claim for shipping
damages may void warranty service for any physical damages later reported for repair.
3.3.
Handling
Handle the equipment with care. Do not drop or lean on front panel or connector. Keep away from
moisture.
3.4.
Identification Labels
Model number and serial number are clearly marked on all equipment. Please refer to these numbers in all
correspondence with Newmar. Ideally provide a photograph of the product label for reference.
4.
S
COPE
This manual covers essential information for the installing and commissioning of the Newmar Power
System Centurion II.
Note:
System set-up for the controller, power modules and other ancillary devices are provided in separate
manuals. Where appropriate these are supplied with the system.
Note:
The Centurion II System is available with Positive Earth (-48Vdc, -60Vdc) or Negative
Earth (+24Vdc). The installation manual covers both Positive and Negative Earth systems. The
standard system is assumed to be a Positive Earth system. Where parameters and settings
differ between systems, the Negative Earth system parameters are specified within parenthesis
i.e. ().